-
Provides hands free operation, no need
to remove gloves to search for keys, there are none!
-
Provides magical like starting for the
owner only.
-
Virtually no chance of drive off theft,
unique Identification Code provides security, Over 1 gazillion
combinations.
-
No keys, no scratched paint just leave
credit card sized transponder in wallet or back pocket and press starter
button, no codes or numbers to remember.
-
High Cool Factor –
NO KEYHOLE - invisible starting system for a cleaner look. No keyhole to
short out while washing your bike! No wiring harnesses fried!
-
No key fob, No need to press buttons on a
remote or find and remove a remote control device from a pocket. Just
get on your bike and ride!!!
-
Card Key Transponder in your wallet never
needs a battery! You can't leave home without it. In addition if you
left your wallet in the bar, it will obviously remind you to return
there and get your wallet back!
-
Simple wiring procedure just like wiring in
a key switch.
-
This is a ground based system which
reduces ground shorts and electrical fires.
-
Antenna can be read from as far away as 12
inches from center of antenna. Place antenna inside the seat . The
following picture shows the approximate location of the antenna in the
seat.
-
Hermetically sealed for harsh
environments.
-
Cannot be defeated with a screwdriver or
lock pick.
-
Internally, two microprocessor voting
system prevents tampering with.
-
Works in conjunction with our motorcycle
light controller for battery saving, theft deterrence and seamless
operation.
-
Can work alone without our light
controller, replaces conventional key switch
-
All Solid State, no moving parts
-
Automatic Over temperature cutoff
-
Automatic Over Voltage or Under Voltage
shutdown
-
16V Reverse Polarity power protection on
outputs
-
Operation from
3 Volts DC to 27 Volts
DC
-
Standby current <5.0uA
-
Static Discharge protection to 15 kV DC
-
Can supply 100
Amp DC
continuous to a relay or motor
-
Can supply 100
Amp DC
continuous to an ignition system – resistive or inductive loads
-
Requires antenna placement in seat foam – 2
inch clearance from metal backing required minimum.
-
Key Card replacement and serial number
database maintained by BulletProof Electronics to prevent theft of Key
Codes.
-
Module size 3 1/4" x 2 3/8" x 1"